ST8-EM 7.5 W/6500 K 600 mm

Product benefits
  • No bending thanks to glass technology
  • Quick, simple and safe replacement without rewiring
  • Energy savings of up to 60 % (compared to T8 fluorescent lamp on CCG)
  • Instant-on light, therefore ideally suitable in combination with sensor technology
  • Also suitable for operation at low temperatures
View all details
Product data sheet

PRODUCT DETAILS

Electrical data

Nominal wattage 7.5 W
Construction wattage 7.50 W
Nominal voltage 100…240 V
Nominal current 78 mA
Type of current AC
Operating frequency 50/60 Hz
Mains frequency 50/60 Hz
Power factor λ 0.90

Photometrical data

Luminous flux 1000 lm
Luminous efficacy 133 lm/W
Lumen main.fact.at end of nom.life time 0.70
Light color (designation) Daylight
Color temperature 6500 K
Color rendering index Ra ≥80
Light color 865
Standard deviation of color matching ≤6 sdcm

Light technical data

Beam angle 160 °
Starting time < 0.5 s

Dimensions & Weight

Overall length 604.00 mm
Diameter 28.00 mm
Product weight 95.00 g

Temperatures & operating conditions

Ambient temperature range -20…+45 °C
Maximum temperature at tc test point <75 °C

Lifespan

Number of switching cycles 100000

Additional product data

Base (standard designation) G13
Mercury content 0.0 mg

Capabilities

Dimmable No

Certificates & Standards

Standards CB, ROHS, SASO2902

Country-specific categorizations

Order reference ST8A-0.6M 7,5W/

Energy labelling regulation data acc EU 2019/2015

Light source cap-type (or other electric interface) G13
Length 604.00 mm
Height 28.00 mm
Width 28.00 mm

PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS

Minimum rate of recycled material in packaging 80 % 1)
Minimum percentage of recycled content in the product 0 % 1)
Product recyclability Mostly recyclable product 1)
Packaging recyclability Mostly recyclable packaging 1)
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage No

1) According to AGEC Decree 2022-748 (French Anti-Waste-Legislation for a Circular Economy)

Product benefits
  • No bending thanks to glass technology
  • Quick, simple and safe replacement without rewiring
  • Energy savings of up to 60 % (compared to T8 fluorescent lamp on CCG)
  • Instant-on light, therefore ideally suitable in combination with sensor technology
  • Also suitable for operation at low temperatures
Areas of application
  • General illumination within ambient temperatures from -20…+45 °C
  • Illumination of production areas
  • Traffic zones and corridors
  • Supermarkets and department stores
  • Industry
Product features
  • LED alternative to classic T8 fluorescent lamps in CCG luminaires
  • Bright, robust and durable
  • Uniform illumination
  • Tube made of glass
  • Mercury-free and RoHS compliant
  • Type of protection: IP20
  • Integrated ECG with high power factor
Equipment / Accessories
  • Suitable for operation with low-loss and conventional control gears
Legal advice
  • When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system.
Safety advice
  • Not suitable for operation with electronic control gear.
  • Operation in outdoor applications in suitable damp-proof luminaires possible according to data sheet and installation instruction.
References / Links
Product code Packaging unit (Pieces/Unit) Dimensions (length x width x height) Gross weight Volume
4058075643437 Sleeve
1		 655 mm x 28 mm x 28 mm 114.00 g 0.52 dm³
4058075643444 Shipping box
25		 710 mm x 155 mm x 160 mm 3355.00 g 17.61 dm³
Product image: white background, diagonal
LED TUBE T8 EM JPG (769.9 KB)
Product image: white background, upright
LED TUBE T8 EM JPG (650.51 KB)
Product line drawing, front, no dimensions
338275_SubstiTUBE Basi c ST8-HB SVG (3.88 KB)
IES file (IES)
ST8A-0.6M 7,5W 865 EMW V IES (6.88 KB)
Light distribution curve type polar
ST8A-0.6M 7,5W 865 EMW V SVG (20.41 KB)